GRAPHICS
TROUBLESHOOTING
PAGES
This is the questions page to the problems you have. Each question on this page takes you directly to the answer rather than having to scroll all the way down a full page of information.
Please bear in mind this page is updated daily and if the question you seek the answer to is not here, then it may well be here tomorrow.
Please feel free to email the author of the site if you have a specific problem you need help with and we will do what we can to get back to you and solve the issue.
Don't forget to
check out our tips and tricks section under your operating system.
We have a lot of answers to your questions to solve you problem there also.
i m having AMDK2 board with processor 500Mhz having video card Sis 530 in built . i want to install Navidia TNT4 card for this there is jumper in motherboard which i have to change to enable external video card but i have lost the manual book of this board .... i have searched on net a lot but did not got it ....what should I do now?
Need some help with VGA driver. VIA KT400 Chipset Based KT4 Ultra Series running Athlon 2200 XP
256DDR Ram
GF4 Ti4600 128mb AGP video card. I just put this system up last night and I installed everything fine and all. When I run my monitor through my video card for just going to net and while I am on desktop my GF4 resolutions are there and all, but when I try to play any video games I cant, so i checked my systems hardware and I noticed that there are no VGA Drivers installed, and I tried to solve this problem last night but I don't know which drivers I should look for and which ones should I install.I have noticed with some graphics cards that they have ddr sram memory.
Does my pc have to have ddr memory for this type of card to work or does it not matter if it is ddr or sd ram.I have a celeron 500 with no agp slot!
What would be the best solution to play games like medal of honour
and splinter cell.
I`m running windows xp with onboard shared graphics (intel 8 mb).Where can I get support from NVIDIA graphics cards?
I couldn't find anyone that seemed specific to my problem so I'm trying you, to see if I can narrow it down. I am currently using my computer with a scanner and printer, and a digital camera. I work on a wide variety of art and photo images. And am looking for a program that will do Computer Assisted Drafting.
I have this problem with the ArcSoft Photostudio 2000 program that came with the Canoscan D646U. Most frequently I get this error message when I try to scan a large image...that the virtual memory is too low and it will have to shut down. I couldn't find any experts in this program. So is a graphic accelerator something that helps with problems like this, and needed for CAD?How do I find out what what video card I have got.
I have decided to try and move some of my years of accumulated VHS video tape material to either CD or DVD. My PC has a NVIDIA GeForce2 MX video card which doesn't seem to have a connection for the VCR. Can anyone confirm that cards with NVIDIA chipset do not have a TV in connection. Going a bit further, can anyone recommend a reasonably priced replacement which has a TV in connection and which will have the same video qualities as the existing NVIDIA card.
I would like some advice on buying a new Video card for our computer. The old card a 2MB SGRAM Matrox has failed.
The computer is 5 years old is a Pentium 200MhzMMX , and has 32MB SDRAM DIMM, Windows 95 operating system. The number of cards available is quite mind boggling, I need to know what things I should be looking out for.....
All small point sized text is barely legible when on web sites eg. egg.com instruction buttons on the left of screen. It is not the monitor and I have reinstalled the drivers. Could it be the graphics card itself although this has passed self tests.
After trying to load a game onto the pc. My graphics card has gone to 16 colours, When trying to load graphics card again, it tells me I have lost a dvideo.dll file and to put my windows disc back in, but it can't find this file either. any suggestions?
